Support for Weekly System Entry Capacity (WSEC)
The Capacity Trading and Long Term Booking screen now supports Weekly System Entry Capacity (WSEC). Capacity bids with Bid Type WSEC can be entered and Gemini Refresh will update CodeRunner with capacity bids of this type from Gemini. These bids are included in capacity calculations.
Post, Modify and Withdraw capacity bids
The Daily Bids and Scaleback screen now supports posting exit and entry capacity bids to Gemini. Capacity bids can also be modified or withdrawn using the new 'Modify Selected' and 'Withdraw Selected' buttons. Any capacity bids posted from CodeRunner will be Evergreen.
Gemini Refresh button replaces Gemini Query and Update CodeRunner buttons
On the Daily Bids and Scaleback screen the 'Gemini Query' and 'Update CodeRunner' buttons have been removed and replaced with a 'Gemini Refresh' button. Gemini Refresh will update CodeRunner from Gemini.
Auto population of reserve prices for capacity bids
When adding a new capacity bid on the Daily Bids and Scaleback screen the reserve price can be populated in the price column. Reserve prices can be configured for each sub-terminal and bid type in the GeminiConfig.config file.
Show size of capacity breaches
Previously, rows with capacity breaches in a number of screens were highlighted, but the 'Remaining Capacity' columns showed '0' so the size of the breach was not explicitly shown. The following columns have been changed to show capacity breaches as negative amounts:
- Remaining Capacity and Remaining % on the Entry Capacity, Exit Capacity and Swing Exit tabs of the Sense Check screen.
- Remaining Capacity on the Beach Positions screen.
- Surplus/Deficit on the Retro Trading Availability screen.
- Capacity Available (kWh) column on the Capacity Position tab of the Contingency and Extended Contingency Excel reports (note these are specific to a single customer).
A Remaining Capacity column has also been added to the Capacity Usage screen.
Add exit capacity information to reports
Exit capacity information has been added to the Capacity Reconciliation report, and some customer-specific capacity reports.
Allow additional decimal places for swing contract CVA percentage splits
Increased the maximum number of decimal places from 2 to 8.
Improve validation when importing expected deliveries
- Importing expected deliveries now correctly gives an error message if no nomination exists for that gas day.
- Importing expected deliveries no longer gives an error when nominations have previously changed for that gas day.
- Improved validation of expected delivery imports for contracts with a master contract.
Swing Nominations by Gas Day should remove superseded nominations
Nominations in the Swing Nominations by Gas Day screen now correctly override nominations which start later in the gas day.
Swing Nominations by Gas Day screen should preserve nominations for unchanged sub-contracts
When modifying a contract with multiple locations or sub-contracts on this screen, changing some cells and leaving others blank would cause the blank cells to be saved with the rate currently in force. They will now be saved with the rate in force at the start time of the new nomination.
Forced password resets
A password reset can now be forced for any user at any time via the Maintenance > Users and Groups screen.
Remove Variable Production Factors screen
The Variable Production factors screen has been removed. The corresponding options can still be configured via Maintenance > Swing Contracts.
Remove Parameter Maintenance screen
The Parameter Maintenance screen has been removed. Most of these options were no longer used. The single remaining option (Balance Tolerance) has been moved to Maintenance > Options.
Remove StorIT interfaces
All functionality related to StorIT has been removed as the Rough storage site has been decommissioned.
Remove Release Notes screen
Release Notes can now be found exclusively on the GMSL website. A copy of this URL has been added to the Help > About screen.
Auto Login improvements
The Auto login functionality now allows different credentials to be configured for different CodeRunner clients running on the same machine. In addition, the Auto login behaviour will now be disabled once the credentials supplied become invalid. The login box has been slightly redesigned to accommodate the extra information this requires.
Swing Contract Ordering screen
A few issues have been fixed on the Contract Ordering screen. Contracts removed from a manual ordering now reliably return to the default alphabetical ordering.
Most pop-up screens are now reliably centred on the application rather than on the monitor, most notably application progress bars and login boxes. This excludes certain kinds of Windows-created message boxes (e.g. error messages).
A few screens where resizing didnât make sense have had their resizing disabled. This include Weekly Policy Load, Actuals Import, Trade Import and Export Swing Nominations. In addition, screens that cannot be resized can no longer be minimized.
Windows authentication now works for domain users as well as local users.
Password expiry periods are now clearly displayed and no longer reset to 30 days when editing a user.
Fixed an issue where some contract settings were only inherited by subcontracts when the parent contract was edited.
69628: Gemini Connectivity
CodeRunner now retries 3 times before failing any action connecting to Gemini. This makes the connections more robust.
69628: Performance Improvements
CodeRunner now performs better when a database contains a large number of swing contract nominations.
69628: Windows Authentication
Allow CodeRunner to use Windows Authentication to log in.
70230: Status Overview Bar
The introduction of the Status toolbar allows users an immediate overview of frequently used screens, indicating either an OK status (shows green) or highlighting an issue that needs to be investigated further (shows red). Each indicator links to the relevant screen, showing more detail
70231: Sense Check
Sense Check tabs have been updated so all flagged issues are now grouped together at the top of the grid on each tab.
70538: Beach Positions
The Beach Check tab has been removed from the Sense Check screen. Instead there is a new Beach Positions screen accessible via an icon on the main toolbar, which shows the same data. Behaviour of the beach checks and alerts is unchanged. If an Insufficient Terminal Gas alert is shown, it links to the new screen.
71110: Updated Contingency Pro-forma
Contingency pro-formas have been updated in accordance with National Gridâs requirements. Separate forms are used for entries and trades, and for DM exits.
71376: Company Logo
The logo has been moved from the âmain screenâ to the top left of the application to increase its visibility.
72084: Period Nominations
It is possible to now select and nominate both entries and exits simultaneously. The default option on which to base the nominations has been changed to âForecastâ.
74993: DFN faxes for IP nominations
CodeRunner will now allow you to print Deemed Flow Notifications for Bacton IPs only (IUK and BBL). National Grid will accept these from 13th August 2017.
62340: Regional Date Settings
Regional date settings on local machines other than the standard expected en-GB settings were causing errors and loss of functionality when trying to log into CodeRunner. There is now a dialog box that alerts you to this if such settings are in place.
69548: Import of Swing Nominations
If a Weekly Policy Load was incorrectly imported for the current week rather than week ahead it would over-write the existing nominations. An error message will now be displayed if an attempt is made to import a WPL for a time other than week-ahead.
62580: IP nominations
CodeRunner and Gemini were applying different rounding logic to the IP values subjected to the temperature conversion, resulting in small kWh discrepancies in calculated totals. CodeRunner has been adjusted to calculate in line with Gemini to avoid this.
62669: Swing Nominations by Gas day
When editing a swing contract incorrect data was consequently showing on the âSwing nominations by Gas Dayâ form. This has now been fixed.
67433: Swing Contract Expiry
Occurred when importing swing nominations directly to the CodeRunner database. If a nomination was for a gas day beyond the expiry date of its contract, the import was accepted but CodeRunner became unusable. This bug is not found when importing via the usual import service or the UI. Alerts have been added to avoid this.
68748: Importing CVA Data
Importing CVA data where a sub-terminal location is incorrectly configured or absent caused a stack overflow. A dialog box will now pop up to allow editing of the sub-terminal in question.
71063: Default Screen Positioning
Occasionally when logging back into Gemini at 05:00 the default CodeRunner screens would reopen in different positions, often outside of the immediate viewer. This has now been fixed.
71065: CVA Claims
A bug whereby conversions within CodeRunner failed if a CVA Claim value was close to zero (quantity smaller than 10^-10) has now been fixed.
71840: Saving NDM Forecasts
A rare bug whereby CodeRunner was simultaneously accessing and saving duplicated NDM forecasts with identical timestamps was discovered. The database table has been changed to provide a unique index to prevent duplicate data.
63969: Project Nexus Trials - UIG By LDZ
The âUIG by LDZâ screen has had a number of improvements to make it clearer and easier to use.
63474: Project Nexus Trials - Negative UIG Values
CodeRunner now correctly handles negative UIG values when refreshing Gemini Balance.
65457: Swing Nominations, IPs and Nominate To
Swing Nominations at IP locations now respect the âNominate Toâ setting for the Counterparty.
65340: Within-Day Renominations of Zero
Under certain rare circumstances, Gemini continues to return a âNominatedâ value for IP locations for an hour that has passed. This value is now correctly ignored if it is older than the latest âScheduledâ value.
64543: Beach Swing and Trade Last Contract
The Beach Swing and Trade screen now correctly shows the subcontracts of the most recently added contract.
62674: Exported Deliveries Precision
A precision issue has been fixed where the expected deliveries could be exported even though they had not changed.
63217: Beach Check Algorithm
Beach Check calculations now reflect National Grid methodology for calculating transit charges where one terminal on a short-haul tariff uses 0/25 reference conditions.
60496: Bacton IP Temperature Conversion
Nominations and Capacity checks at Bacton IP will be done using EU-mandated 0/25 reference conditions from 1st May 2016. To support this, Terminals and Exit Points can now be configured as transitioning to 0/25 from 1st May. All quantities at 0/25 will be labelled as such. CodeRunner balance calculations will convert the 0/25 values to 15/15 before including them. A conversion factor of 0.999 is used.
61257: Unidentified Gas for LDZ Shippers
Unidentified Gas is currently planned to come into use on 1st October 2016. Unidentified Gas values are now saved in the database. There is a new drilldown screen which shows your Unidentified Gas breakdown by LDZ. This data comes from a new API, and therefore attempting to view the drilldown before the API is live will fail with an appropriate error.
61744: Activity Maintenance
The filter at the top of Activity Maintenance has been changed. The activity box now contains more information, and can be sorted by number or by description.
61383: Gemini Balance Default Unit
The Gemini Balance screen will initially display data in Therms rather than kWh. The default unit is configurable on the Maintenance > Options screen. A warning will be shown when the screen is not in its default unit.
61326: Physical Position Screen supports NBP
If a swing contract includes NBP and at least one physical location, shortfalls can be entered at the NBP as well as at the physical location(s).
61246: Physical Position Permission
The physical position screen now has its own user permissions setting. This is initially set to the value of the âSwing Nominationsâ permission, as this is what previously controlled this functionality.
61332: Trade Matching
Trade Matching no longer contains entirely blank lines when a nomination of zero has been rejected. Instead a zero will be displayed in the Nominated column.
56189: Forecast Updates
Some rare situations where the forecast value could be temporarily out of date have been fixed.
61711: Gas Day Summary
The Gas Day Summary screen once again includes storage activities.
61256: Gemini Nomination Pending Alert and Counterparty Tolerances
A forecast-nominated difference within a counterpartyâs tolerance will no longer trigger the alert.
61462: IP Nominations Creation Timestamp
IP nominations are rejected if their creation timestamp is after Geminiâs current time. To work around this, CodeRunner now generates all its creation timestamps for IP nominations as 3 minutes before the current time.
60884: Period Nominations at IPs
Period nominations should now always nominate IPs. Using period nominations to nominate forecasts now correctly nominates the forecast value for subsequent days when the first gas day has a zero forecast.
61309: Sense Check
Sense Check should now always display all IP locations on the Entry Capacity Check tab.
61276: Swing and Trade
The âNBP Swing and Tradeâ and âBeach Swing and Tradeâ screens can now be open at the same time.
61523: Trading: Activity Column
The âActivityâ column on the Trading screen now correctly reflects the âNominate Toâ setting on the counterparty.
61523: Trading: Default Gas Day
Adding a new Shaped Trade will correctly default the new trade to the selected gas day.
61523: Trading: Pressing Apply
Pressing the âApplyâ button followed by the âOKâ button on the âCreate New Shaped Tradeâ screen no longer creates two shaped trades.
60158: Removed: Unused Reports
The âCorby Allocationsâ report and the âFinanceâ report were removed, as they were no longer in use.
60158: Removed: Print Nominations
The âPrint Nominationsâ option has been removed from Maintenance > Options. Nominations can be printed for contingency by turning on contingency mode, or for a DFN by using the Print DFN button.
60158: Removed: Load NTS Nominations
The âLoad NTS Nominationsâ screen has been removed. All such data is being loaded automatically by the Gemini Balance screen.
60158: Removed: Transistion Options
Options built to allow smooth transitions on 1st Oct 2015 and 1st Nov 2015 have been removed. This includes: âNew Terminalâ for a subterminal (now always at the new terminal), and âPoll IP web servicesâ (now always on).
59516: Estimated Values
Estimated values at exit points are currently planned to come into use on 1st October 2016. The Nominations screen now supports the âEstimatedâ values if Gemini returns them. A new alert has been added which appears if estimated values exist on Gemini.
59515: Unidentified Gas
Unidentified Gas for LDZ shippers is currently planned to come into use on 1st October 2016. Unidentified Gas values have been added the main summary screen, the Gemini Balance screen, and a number of reports which include these same values. Note that CodeRunner does not yet support downloading and importing the correct Unidentified Gas values from Gemini.
59614: Nominating VLDMCs (15 minute lead time)
VLDMC activities can now be set to the next hour bar if you are still outside the 15-minute lead time. The default start time remains unchanged as being a clear hour.
59777: Nomination History
The Nomination History screen now sorts the nominations by when they were submitted, rather than by the start time they were submitted for. This makes the screen clearer when DFNs are submitted, as these have a start hour of 05:00.
59578: Past Nominations
The Nominations screen now allows you to view (read-only) data for days in the past.
60059: Rejected Nominations
The behaviour around rejected nominations has been changed. Rather than popping up a detail screen, CodeRunner now only displays the âNBP Rejected Tradeâ alert. This alert has been turned on by default as part of the upgrade. Clicking on the âNBP Rejected Tradeâ alert will now take you to the Trade Matching screen. The Trade Matching screen now includes information about any nominations you sent that were rejected, in addition to information about your counterpartyâs rejected nominations.
60046: Service IDs
The Gemini Entry and Exit Service IDs can now be edited on the Maintenance > Options screen.
60232: Capacity Usage
The capacity usage screen no longer displays an additional row collating all the points with capacity disabled.
55796: Required Files Missing
If the required GeminiConfig.config file is missing, CodeRunner now provides a more user friendly report of the problem.
60284: Swing Nominations Import
An issue has been fixed around weekly swing nominations being imported into CodeRunner after a shortfall has been entered.
57947: Nomination History Changes
The Nomination History screen now contains a full history of nominations that CodeRunner has seen, rather than just your current (profiled) position. IP nominations are now included on the screen, and the screen now displays the numerical value of each change, in addition to the percentage. A filter has also been added for âAllâ, âPhysicalâ or âNBPâ. The screen defaults to âPhysicalâ.
The toolbar has been expanded with more links to commonly-used screens (Trade Import, Trading, Swing Nominations by Gas Day, Shortfalls, Trade Matching, and Matching and Scheduling), and moved from the âCodeRunnerâ screen to just below the menu. A Gemini Exit login button has also been added.
57411: About Screen
The âHelp > Aboutâ screen now contains much more information when the new âEnvironmentâ button is pressed.
58899: Gemini Balance
The âShipper Preliminary Balanceâ screen has been renamed âGemini Balanceâ. This screen is now opened automatically on successfully logging into Gemini.
56412: Gemini Logger
The Gemini Logger now also includes login and logout messages.
58744: Main Screen
The labels that are links on the main screen (e.g. Shortfall amount) are now more obviously links, and only require a single click.
57926: Matching and Scheduling
The default filter for this screen is once again set to âAllâ.
58813: Menu Items
There are now two menu items for logging into Gemini. The existing one has been renamed (Main), as this contains most of the Gemini APIs. The Exit Capacity API can now also been accessed from the menu, and is labelled (Exit Capacity).
The âStart Timeâ field is now disabled until the renomination window is open. This better reflects the fact that Gemini treats all nominations submitted before this time as starting from 05:00.
57844: Removed Screens
We have removed the Pipeline Maintenance and Services Maintenance screens, as these no longer serve any purpose.
55092: Sense Check
The âEntryâ tab on sense check now breaks down IP subterminals into their constituent nominations.
55982: Trade Import Performance
Performance improvements have been made to the trade import system (via Excel and via XML).
58558: Weekly Policy Load
The Weekly Policy Load now displays a progress bar while it is running.
57726: Daily Bids and Scaleback
Clicking âCheck Geminiâ multiple times no longer keeps adding more rows to the grid.
58405: Error Reporting on Database Disconnect
Errors caused by connectivity issues with the CodeRunner database now contain more detailed information.
55813: Gemini Balance
A number of fixes have been made to how the screen loads data. This should drastically reduce the extent to which CodeRunner and Gemini can get out of sync.
57262: IP Exit Capacity
Capacity checks where multiple exit points share capacity are now displayed correctly on the capacity usage and capacity summary screens. (This currently affects only the Moffat location with flows to both adjacent TSOs.)
59113: Monthly Summary Report
The Monthly Summary Report screen now includes IP values.
57788: Imported Forecasts
DM forecasts imported from excel and csv files are now created with the correct default start time of 05:00.
57799: Loading Moffat Nominated and Scheduled Values
Loading of this information now works correctly for shippers who are active at Moffat against both GNI and PTL network operators.
57708: Exit Capacity Bids
Updated the sample bid windows to contain the latest bid windows from National Grid.
57708: Exit Capacity Bid Windows
Exit capacity bid windows can now be configured in the GeminiConfig.config file in the same way as entry capacity bid windows.
57553: Data Exchange Service Performance
Importing Shaped Trades via the Service should now be considerably faster and use less memory.
57294: IP Capacity Bids
IP Capacity Bids are no longer highlighted as missing from Gemini on the Daily Bids & Scaleback screen. Gemini does not provide this information.
57456: IP Information on Shipper Preliminary Balance
Fixed an error that could occur under specific conditions where a Swing CVs error would be raised when nominating with Shipper Preliminary Balance open.
57628: Nomination Start Hour
The nominations screen should once again correctly default to the latest of the next available hour bar and the last nominated hour.
57636: Nomination Start Hour
The nominations screen should once again correctly default to the latest of the next available hour bar and the last nominated hour.
Fixed an issue outputting numbers to Excel reports as text. They should now be correctly exported as numbers.
57360: Counterparty Maintenance
This screen now includes the ability to configure shipper codes for use in IP nominations.
56795: âNominate Toâ in Adjacent TSOs
This option can be enabled at Adjacent TSO level. It allows nominations against multiple counterparties to be aggregated against a single shipper code in all IP nominations with that adjacent TSO.
53984: Overview: Support for IP Locations
CodeRunner now supports IP locations from 1st October. Subterminals and Exit Points can be marked to become IPs on 1st October, and need an EIC code if they are marked as such. This data filters through to a large number of screens in CodeRunner; the largest changes were made to the Sense Check, Nominations, and Matching & Scheduling screens.
53984: Overview: Support for IP Locations
CodeRunner now supports the capacity changes coming into force on 1st November around IP capacity. Each exit point will automatically transition to using IP capacity if it is an IP location, whereas terminals always get their capacity from a single source. Subterminals can be configured to move terminal on 1st November to assist with the transition.
Activities for Bacton will automatically be set to have an end date of 1st October at part of the upgrade. Other activities becoming IPs on 1st October (most notably those at Moffat) will need to be expired manually. This can be done on the Maintenance > Activities screen.
54536: Adjacent TSOs
A new maintenance screen for the various Adjacent TSOs has been added. Each IP location needs an adjacent TSO. Counterparty codes within that TSO will need to be configured to make IP nominations with that Counterparty.
Various alerts are now also triggered when IP locations have the corresponding issue. This includes Gemini Nominations Pending alert, Beach Gas Alert, Terminal Beach Gas Alert and the Capacity Breach Alert.
54537: Beach Checks
Beach Checks are now more configurable. Rather than using a single terminal and its linked exit points, a number of terminals and exit points can be linked together to form a check. This is most immediately useful to perform shorthaul checks between the new terminals after the Bacton split.
54537: Beach Checks
These checks are now used for the Terminal Beach Gas Alert, as well as the Beach Gas tab on the Sense Check screen.
56637: Capacity Bid Types
CodeRunner supports modelling of the various new capacity bid types required for IP locations. These are IPAYSEC, IPAQSEC, IPRMSEC, IPDADSEC, IPWDDSEC, IPDISEC and DBSEC. (Note that only aggregate capacity entitlements are downloaded from Gemini, not individual bids.)
56763: Capacity Usage
The capacity usage screen is now sorted alphabetically.
54604: Gemini APIs
This release includes the four new Gemini APIs used for IP locations: add/update nominations, get nominations, and get capacity entitlements (for entry and exit capacity). This will need to be turned on via Maintenance > Options before they can be used.
54537: Location Maintenance
Exit points no longer have a âLink to Terminalâ box, as this functionality was replaced by the Beach Checks maintenance screen. The configuration is migrated to the new format as part of the upgrade, so current behaviour will be unchanged.
52789: Location Maintenance
Exit Points and Subterminals can now be marked as Interconnection Points, and will need an EIC code entered. Points marked as such will transition to becoming IPs on 1st October.
56603: Location Maintenance
Subterminals can be configured to change which terminal they are part of on 1st November. This is required for Bacton to split into two terminals on this date as part of the capacity changes.
56777: Matching & Scheduling
Matching and Scheduling now defaults to a new filter âAttentionâ. This shows any highlighted row- whether because the nomination isnât yet scheduled, or because there is a mismatch.
The Nominations screen in contingency mode now hides the Nominate button, and instead displays two new buttons: Print Fax and Export Excel. These have the same behaviour as the Nominate button used to, but in a clearer form.
âMy EIC Codeâ can now be configured, as this is required for IP nominations
54686: Swing Contracts
Swing Contracts can now be marked as staying 6-6, to allow faxes to the other parties to be generated correctly. A strategy for converting these 6-6 numbers into 5-5 numbers will need to be configured. Only a single strategy is available at this time: Align Values (6am nominated as 5am).
55087: Counterparties Maintenance
Renaming a counterparty should once again behave correctly.
54601: Nominations static data refresh
The Nominations screen should now immediately reflect counterparty configuration changes made to the client in question. Other clients will need to wait for the refresh interval as before.
55002: Swing Contract Nomination Imports
When a swing nomination is imported via the service, nominations for later in the day are now correctly replaced.
51447: Gas Day Change
CodeRunner now knows that the gas day will start at 5am from 1st October 2015. It is notable that this date can be changed via a script if necessary.
52148: Locations Maintenance
A new âLocationsâ maintenance screen has been added, replacing the Terminals, Subterminals, LDZs and Exit Points screens. All four of these things are now configured on a single screen.
51703: Removing Obsolete Screens
A number of obsolete screens have been removed: INS Nominations, Manual Reports, Quick Nominations and Transco Balance.
51817: Swing Contracts by Gas Day
Swing Nominations will now always be created or edited by gas day, rather than sometimes by calendar day.
52663: Gemini Code Mandatory for Capacity
The âGemini Codeâ for a Terminal and Exit Point is now mandatory if capacity checking is enabled.
51270: Preliminary Interconnection Point Support
Some features have been added to allow support for IP to be added in a future release. This includes EIC codes on counterparties and locations, deadlines for IPs on National Grid Parameters, and the ability to mark a location as an IP.
52396: Nominations Screen Redesign
The nominations screen has been redesigned. The screen is now intended only to be used for nominating to Gemini, and as such contains less information. Both Entry and Exit nominations can now be done simultaneously.
52396: Nominations Screen Redesign
Automatic selecting of Pending nominations is now enabled via an option. This option is enabled by default.
53267: Matching and Scheduling
A new screen has been added to help with displaying Matching and Scheduled values. This replaces this function of the previous Nominations screen. The screen displays Nominated values, Scheduled values, the nominated Start Hour, and the value nominated by counterparty for trades. This is displayed for both Entry and Exit services.
52157: Period Nominations
Period Nominations is now a stand-alone screen instead of being linked to Nominations. It can be opened from the Operations menu.
54533: Updated DFN Template
The DFN template has been updated to include the current nominated value as well as the new value to meet the new National Grid policy.
54432: Update default bid windows
The default bid windows for capacity bids have been updated to be the new values that went live 1st April 2015.
CodeRunner has received various performance improvements.
52611: Pending Nominations
Added an option to not automatically check all the nominations on the nominations form.
51760: Database Version Messages
The message stating the database version is incorrect now always displays both the current version and the required client version.
52024: Maintenance Screens
The various maintenance screens should now have consistent behaviour regarding when the save button is enabled.
53657: Ini file shouldnât require âLocalâ if âConnectionStringâ is present
The CodeRunner.ini file no longer requires
[Options]Local to be present if
[Options]ConnectionString is present, as it is not required.
51272: Zai*net improvements
Some more tweaks and fixes have been made to the Zai*net interface to correctly interpret the files generated by Align.
51272: Allow only Uppercase BA codes
On Maintenance > Counterparties, BA codes may now only contain uppercase letters.
50903: Counterparty Maintenance in Read Only Mode
Read-Only user permissions should now correctly affect the Counterparty Maintenance screen.
47678: Zai*net Trade Import Performance
The Zai*net Trade Import system now has greatly improved performance
46652: Disallow Swap and Shaped trades when Zai*net is enabled
When Zai*net trade import is enabled, swap and shaped trades can no longer be entered, as they do not have a corresponding item within Zai*net.
48068: Issue updaing Coderunner Capacity Trade from Gemini
Fixed a problem updating existing CodeRunner Capacity Trades from Gemini at the same time as adding new ones.
45941: Archiving Pended XML imports twice
Fixed a bug where pended XML would be archived twice- once incorrectly.
48316: Issue pasting into Producer Actuals grid
Pasting numbers into the grid on the Producer Actuals screen once again correctly updates the screen.
46822: Shipper Preliminary Balance fixes
Better error reporting and prevents updating before balance is loaded.
46610: Fax Groups donât work correctly if not all active
Fax Recipient active flag is honoured once again.
46613: Weekly Policy Load always claims the data is in the past
Weekly Policy Load warning fixed.
46480: Allow printing to multiple printers from âFax Nominationâ
CodeRunner will now print to printer(s) selected.
46575: Default Screen Size
The default size of pending area is now larger, and sizing issues with Fax Status screen have been fixed.
46580: Contract Limits import should be case independent
Swing Contract look-up is now case insensitive.
46581: CVA XML export should give a skippable warning if no CVA Ref entered.
CVA exports now skip items with no CVA reference, showing a warning.
46582: Producer actuals main grid is too large for the frame
Producer actuals sizing issues fixed.
46583: When import service cannot find contract, donât do other checks
No further validation is attempted if a Swing Contract cannot be found.
46584: Extended Contingency Report problems
Extended Contingency Report is now correctly generated when multiple configured activities exist for a point with an active nomination.
46591: Counterparty maintenance form disabled
Fixed problems with read-only access to Counterparty Maintenance screen.
46164: Exports from CVA website can contain invalid date timestamps
Handle â0000-00-00T00:00:00+00:00â in XML files produced by CVA website (CodeRunner CVA Imports)
46047: IAS39 custom report not working in version 7
Fix IAS39 regression in Excel automation.
45675: âTrades Absent From Zai*net Reportâ not working
Trades Absent From ZaiNet Report in zainet reconciliation tool not always working due to uncommited database transaction.
45708: M5 Report - not outputting the same data as CR6
The M5 report was missing some data.
22550: Beach swap functionality
CodeRunner now supports swap deals. This can be found as a new button under Operations > Trading
40219: Coderunner label in Windows Taskbar for GMSL
Windows taskbar now displays the CodeRunner client name rather than âCodeRunnerâ if you are GMSL.
43535: Export Swing Nominations
Swing nominations can now be exported as XML to help with handovers for Coderunner users to GMSL Ops.
34569: Fax functionality restored
The functionality on the Fax Status, Fax Recipients and Fax Groups screens now works as previously
43785: Import Trades screen now displays xlsm files by default
Import Trades screen now displays xlsm files by default.
44843: The CodeRunner main screen can no longer be closed.
The CodeRunner main screen can no longer be closed.
39429: Shipper Balance screen loads nomination data asynchronously
Shipper Balance screen now downloads data from Gemini asynchronously. The âload nominationsâ button no longer needs to be clicked.
36104: Capacity Bids screen now shows total price paid for allocated quantity
Capacity Bids screen now shows total price paid for allocated quantity. On live orders it shows the total price for bid quantity.
39320: Add M1-M6 reports to the Report Scheduler
Add M1 -> M6 reports to the Report Scheduler.
43266: Custom Report required for GMSL Ops
Corby Power report for Ops.
38569: Sense check showing mismatch when there isnât one
Sense check no longer shows a mismatch when there isnât one.
35594: Ignore Market Operator Trades
Forecast data now ignores market operator trades.
41485: Capacity bids Entry/Exit box filter box is now coloured correctly
Capacity bids Entry/Exit filter box is now coloured correctly
39725: Built-in Weekly swing fax alignment has been fixed
Fixed alignment issues of the in-built weekly fax format.
42397: Extended Contingency Report Validation Improvements
Extended Contingency report now uses a gasday restriction to perform activity lookups, preventing spurious data appearing
41301: Nomination History screen now behaves correctly for 23 and 25-hour days
Nomination History screen now behaves correctly for 23 and 25-hour days
21503: Users in the âRead Only Geminiâ role can now use the âUpdate CodeRunnerâ button on the front screen
Users in the âRead Only Geminiâ role can now use the âUpdate CodeRunnerâ button on the front screen.
35718: Ignore Mismatch checkbox on Nominations screen no longer unchecks itself
Ignore mismatch in Nominations screen no longer unchecks itself.
43507: Zai*net Reconciliation Interface âCreate Tradesâ now works correctly
Zai*net Reconciliation Interface âCreate Tradesâ now works correctly.
43846: Export Actuals can now be toggled in Maintenance -> Options
Export Actuals can now be toggled in Maintenance -> Options.
44492: Coderunner capacity warning
Coderunner capacity warning now works correctly.
33215: Import Service Caching Fix
Import Service now refreshes all cached data correctly.
33202: Importing NDM forecasts from spreadsheet now works correctly
Importing NDM forecasts from a spreadsheet now correctly imports NDMTOT values.
45001: Make INS Nomination copy button now works correctly
The copy button on the Make INS Nominations screen now works correctly.
40164: Beach Gas Reconciliation Report report
Beach gas reconciliation report showing swing and trade, vldmc, beach trades breakdown, and an insufficient beach gas check (all using expected rather than nominated).
37654: Add/Reinstate ability to save contingency fax as an XLS doc
Contingency faxes can now be saved as well as printed.
38528: Capacity usage screen doesnât always show exit forecasts/nominations for exit points with no capacity
A row will now be displayed for all exit points that have at least one of the following, capacity, gas forecast or nomination
38511: Capacity Summary not showing locations with no capacity in CodeRunner but capacity on Gemini
Capacity Summary not showing locations with no capacity in CodeRunner but capacity on Gemini
38693: Sorting using Coderunner capacity for Gemini selection on Capacity Usage screen
Sorting uses Coderunner capacity for Gemini selection on Cap Usage screen
35047: Capacity Bid IDs not being validated
Not validating capacity bid IDs on saving
38371: Change Password API not working in certain circumstances
Non-immediate (i.e. not forced) Gemini password change not working
34686: Display Gemini connection in use within Coderunner
The about screen on the help menu now displays the active Gemini connection in use so itâs clear when Coderunner is using the live system or test harness.
34477: Fully enable Exit Cap on daily bids screen as per the entry cap
Daily bids screen now supports DADNEX, WDNEX, DBNEX and DONEX exit capacity bids as per entry capacity equivalents.
34476: Enable Exit Cap on Cap usage screen
Capacity Usage screen now displays Gemini exit capacity.
35007: Enable Exit cap on Capacity Summary screen
Capacity Summary screen now shows Gemini exit capacity.
34150: âGemini slowâ mode for when Gemini is being slow
A new feature to help mitigate issues caused by the Entitlements API timing out when using âALLâ as the location. Queries Gemini for each location in parallel.
35031: Show Gemini exit capacity in Swing exit tab of Sense Check
Coderunner will show exit capacity in the Sense check from Gemini if logged in as it does with Entry. The column name indicates which is being used. Coderunner will only show exit capacity for locations where a swing contract has been setup.
35020: Sense check, Capacity Usage and Capacity should not load data when opened
The Sense check, Capacity usage and Capacity summary screens now do not load any data when opened and do not load data on change of date. This makes them more responsive to use and quicker to open.
37692: Prevent Shipper Preliminary Balance obstructing ops user
Asynchronous updating of shipper balance, so as not to interrupt any other task the user may be performing.
34829: Swing nominations - entering value in therms
End-Of-Day textbox for Swing nomiunations performs unit conversion to Therms using âtâ short-code, but doesnât prefix character âtâ on calculated value.
36765: Errors trying to nominate in Nominations screen.
Closing nominations form with âXâ causes errors when re-opening form and trying to nominate. Clicking OK or leaving it open is fine.
37040: Item with same key error in Swing Nomination Reconciliation report
Donât use the start date as a key, it could be the same as the next gas day if the previous one is after midnight.
34107: Incorrect mismatch showing on StorIT tab of checker screen
StorIT mismatch check in Checker screen did its injection /withdraw determination based on whether the nomination is greater than zero. But a user may not enter a nominated amount, only an expected.
26616: CVA codes should always be upper case
Enforce uppercasing of CVA codes so CVA XML exports are not rejected by CLAIM.
29200: Implement Capacity Bids export
Add ability to Import/Export Capacity Bids
30793: Fax alert performance improvement
Unsent Fax alert changed to not use nested views
29675: Capacity Bids are exported using the bid amount rather than allocated.
Fixed problem with Capacity Bids exports using bid amount rather than allocated amount
29676: Error double clicking in blank Capacity Trading window
Fixed error when double clicking in blank space on Capacity Trading screen.
30785: Swing Contract Ordering issues
Fixed multiple issues with Swing Contract ordering screen
30661: Cannot change Swing Contract order
Database transaction no longer left open if an error occurs saving Swing Contract order
30789: Problems saving master contracts
Do not permit saving of locations against Master contracts
30888: Terminal Beach Gas Alert no longer working
Fixed regression bug with Terminal Beach Gas Alert. It was no longer performing the check. Reinstated check.
29174: CVA XML export performance
XML for uploading to CVA is now produced significantly faster.
28313: Cannot import NDM forecasts through the spreadsheet import
Fixed. It is now possible to import NDM forecasts using the âImport Forecastsâ menu option.
28062: Toggling tabs in Sense Check highlights extra rows on Entry Check tab
29084: Errors when editing shortfall rates on several contracts
29285: Unable to backload some NBP activities from Gemini
29330: Ended/Missing contracts cause errors in Prompt Summary report
25810: Allow access to User Maintenance when not using UK settings
If CodeRunner is run on a computer set to non-uk settings then it will now start up but in a mode with only User Maintenance functions accessible.
26606: Swing Contract Definition Import
The XML import interface has been extended to allow the import of basic swing contract definitions. See the interface documentation for more information.
26104: Date check for Weekly Policy Load
A warning will now display when attempting to import a Weekly Policy Load for dates in the past.
22017: Sellerâs Nomination Timestamp defaults
The timestamp on the Swing Nomination screen will now default to the current time, instead of the timestamp on the previous nomination.
22008: Units column on the Pending Imports screen
A âunitsâ column has been added next to the quantity on the pending imports screen.
23870: Option to stop Trades being edited in the Trades screen
An option has been added to Maintenance -> Options to ensure trades are not editable through the UI and can only be imported.
26850: Contingency report NDM figures
The contingency reports have been changed to always use the NGT forecast instead of the custom forecast.
26638: Sense check should use the latest figures from StorIT
If logged in to StorIT, the Sense Check will now fetch the latest nomination data.
26634: âUpdate CodeRunnerâ on shipper balance no longer auto fills the relevant tick boxes on load nominations screen.
26637: Canât register capacity sell trades on Gemini
26635: Quick Nom doesnât send noms to Gemini
22575: Highlight negative System Length
System Length will be displayed in red if negative, on both the front screen and the Linepack & Prices screen.
14885: New shortcut for Nominations screen
âNominationsâ has replaced âTree Viewâ on the front screen.
11544: Addition of Capacity to Tree View screen
Added a new column to the Tree View (Gas Day Summary) screen to display entry capacity.
14716: New screen to view release notes
The release notes for the latest version of CodeRunner can now be viewed in Help -> Release Notes.
22112: Addition of fax tag to display EOD quantity
When using the Fax Server functionality, all âRateâ tags now have an âEODâ equivalent. For example,
22770: Ability to ignore Forecast/Nominated mismatches
It is now possible to set an activity to âIgnoreâ on the Nominations screen. If set, this will ignore any mismatch between the nominated and forecast figures. The change will not be sent to Gemini. If the forecast amount changes, the ignore is automatically turned off. The Nominations Pending alert is also affected by this option.
22596: Gemini password expiry alert
A new alert has been added to warn when the Gemini password is about to expire.
22738: New NDM Forecast History viewer
Added a new screen (Operations -> NDM History) to view a full history of NDM forecasts, along with the changes between successive forecasts for each gas day.
23543: Save Shipperâs email address for Contingency forms
There is now an âEmailâ option in Maintenance -> Options. This sets the address used in the Gemini Contingency spreadsheets generated by CodeRunner.
23742: Changes to how Exits are displayed on the Sense Check screen.
The Exit tab on the Sense Check screen has been split into two separate tabs. The âExitâ tab is now solely for checking against D-1 and D-7 values, and the new âDMâ check shows any differences between forecast and nominated figures. This allows clearer highlighting of any potential issues.
24292: Highlighting rejected trades
Rejected trades will now be highlighted as a mismatch on the Trade Matching Status screen.
23825: Option for alerts to flash late in the Gas Day
An option has been added for alerts to flash during a set time period. This can be found in Maintenance -> Alerts. An example of this might be to highlight the Nominations Pending alert as particularly urgent between 3 and 4am.
25019: New Beach Gas Sense Check tab
Exit Points can now be linked to Terminals via Maintenance -> Locations -> Exit Points. A new tab has been added to the Sense Check screen to check beach gas at a terminal level, taking into account beach swing and trades and any exits that are linked to terminals. Remaining capacity at the terminal will also be displayed. The user will be warned if the total falls below zero.
24897: âView Manualâ option
The CodeRunner manual can now be viewed through the menu option Help -> View Manual.
25025: New StorIT Sense Check tab
It is now possible to mark a swing contract as being linked to a Centrica Storage product. A new tab has been added to the Sense Check screen. If such contracts are set up, then it will display any mismatches between StorIT nominations and Swing nominations.
6986: New Interfaces for Centrica Storage API
Functionality has been added to interface with the StorIT API. The following read-only information is currently supported: - Main Summary screen. This is similar to the âDashboardâ on the StorIT website. - Hourly Profile for each product, including min/max nominations, lead times, and highlighting potential problems. - Aggregate Nominations for All Shippers. A history is saved to allow viewing data for previous days. - Bulletins. This can all be accessed through the Operations -> StorIT menu. Some configuration is required before use.
18311: New Allocations CSV report
Added custom report to display allocation data for NBP and exits.
24863: âLoad Nominationsâ performance
Loading nominations from Gemini into CodeRunner will now be faster. Only the latest nomination is loaded by default, and a âLoad Historyâ option is available to fetch the full nomination history along with timestamps for each nomination. An update button has been added to the Nomination History screen.
26372: Allow XML trade imports to use counterparty External Code
Trades imported from XML can now use external codes for counterparties. If there is no counterparty with the specified name then the external code will be matched instead.
21389: Ability to make a counterparty inactive
It is now possible to set an end date for a counterparty. After this date, the counterparty will not be displayed and it will not be possible to enter data against it. This option is set in Maintenance -> Counterparties.
23239: Configurability of Gemini data
Improved configurability of CodeRunnerâs Gemini functionality to enable GMSL to react faster to any changes affecting the Gemini API.
25369: Direct import of CodeRunner XML file
It is now possible to manually import an XML file in the CodeRunner format. This is done using the âImporting -> Import XML Fileâ menu option.
23888: Hide Inactive contracts also hides future contracts
âHide Inactive Contractsâ now only hides contracts that have ended. Contracts that are yet to start are still displayed to facilitate setup.
25163: Error when nominating âWaiting Nominationsâ
23964: Timeout errors on Capacity Summary screen
23339: Invalid warning when saving DM activities
24394: Excel output method for Swing Nominations
Implemented. The existing âWordâ contact format has been changed to âOfficeâ. The functionality has been extended to allow an Excel document to be used as a template.
18311: New Allocations CSV report
Added custom report to display allocation data for NBP and exits.
24279: Capacity Breach Alert showing when there is no breach
When forecast or nominated entry values exactly meet capacity, it was possible for the alert to show erroneously. This has been fixed.
24719: Performance issues with Load Allocations From Gemini
It now takes significantly less time to load bulk allocation data into CodeRunner.
23905: DMC locations missing from swing contract maintenance
All types of exit location can now be set for a swing contract.
23920: Monthly summary report not showing any data
In some circumstances the Monthly Summary report would not show any data. It will now always show the most up to date figures.
22195: Error in spreadsheet trade import with empty first line
23253: Period nomination not running successfully
23489: Failed sign in attempts not reset when an account is unlocked
23529: Save swing nomination CSV exports in single files
CSV files created when saving a swing nomination will now only ever have one contract per file.
23790: Viewing OCM trades on the Forecast view on the main screen
Added an option in Maintenance -> Options to show Nominated OCM trades on the Forecast view.
23372: âOverwrite Existing Dealsâ choice is lost after trade import
CodeRunner will now remember the âOverwrite Existing Dealsâ option for the trade spreadsheet import.
23373: Default filter for trade spreadsheet import files
The default filter selection on the file open dialog has been changed to show all .xls, .xlsx and .csv files.
23374: Inconsistent defaults for trade shipper
If no shipper is specified in the trade spreadsheet import then it will now default to the counterparty.
22508: Gemini screens reopen off the screen if CodeRunner is minimised
22910: Issues with swing nomination word document creation
23789: NDM not appearing in Forecast in Monthly Summary report
Fixed. If no alternative NDM forecast is set, the figure from Gemini will be shown on the Monthly Summary report.
23246: Unable to download DISEC bids from Gemini
Fixed. A change was made to the DISEC auction dates. CodeRunner has been updated to use the new dates.
22697: Intermittent Gemini timeout issues
22695: Connection String encryption for GMSLExcelInterface component
22573: Error when changing Fax Status for secondary recipient
20318: Manual Refresh of front screen
Added Refresh button to the toolbar on the main screen.
22607: Handle multiple configurations
Multiple portfolios can now be run on the same machine.
22225: Import Trade screen dialogue-box text
The message shown when trades fail to import now lists the failing trade references and counterparties.
22283: Separate Entries and Exits on Physical Positions screen
Drop down filter added to the Shortfalls tab to display only entry or only exit contracts.
22463: Active cell indicator for Swing Nominations screen
The selected cell and delivery point name now appear in bold.
22394: Improve legibility of Preliminary Balance screen
All figures are now larger and clearer.
22398: Increase prominence of Nomination screen menu option
The Nominations link is now at the top of the menu for ease of access.
22511: Gemini âLoad System Informationâ button not intuitive
Renamed to âLoad Linepack & Pricesâ.
22535: Rejected Nominations steals focus when empty
The Rejected Nominations screen no longer pops up when there is no data to display.
22435: Concurrency issues saving Linepack
Fixed potential error when saving Linepack figures from multiple instances of CodeRunner.
22411: Load NTS Nominations screen stays open when complete
Screen now closes itself when finished.
22433: Error when nominating using âQuick Nominationâ screen
22244: Trades screen performance
Fixed performance issues when using the âDelete Allâ button.
22322: Sense Check selection lost when changing units
22363: Inconsistent use of Nomination Tick Size
All swing nominations will now use the Tick Size on the contract.
22192: Swing Maintenance counterparty filter
Fixed issue with the counterparty filter on the Swing Maintenance screen when coming from the Swing Nominations screen.
13102: New Swing Contract Maintenance screen
The Contract Maintenance screen has been redesigned to improve functionality and usability.
19648: Speed improvements for the main screen
The main CodeRunner screen now takes less time to refresh.
19959: Speed improvements for Sense Check screen
Sense Check now takes less time to load.
20306: Nomination contingency faxes
Option to print a fax for nomination to National Grid has been reinstated.
20624: Enable and disable automated XML exports
Check boxes added to the Options screen to control whether XML files are exported for swing nominations.
20618: Shortcut to Contract Maintenance from Swing Nominations screen
A button has been added to the Swing Nomination screen to link to the open contract in Contract Maintenance.
20336: Report descriptions
A description for each report has been added to the Reports screen.
17288: Read Only Linepack access
Current and historical linepack data can now be viewed when the Linepack screen is read only.
20634: Full name for users
A full name can again be specified for users in the Users and Groups screen.
21978: Within day highlighting on Shipper Balance Screen
The Gas Day is now used for the within day check on the Shipper Balance screen.
22171: Use Gasdates on Trades screen
The Gas Day is now used for filtering on the Trades screen.